320 w peak power limiter 1 - 2 ghz madl - 011014 rev. v1 1 1 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. for further information and support please visit: https://www.macomtech.com/content/customersupport 1 features ? +55 dbm peak power handling @ +85c ? +53 dbm cw power handling @ +85c ? 0.35 db insertion loss (1.2 - 1.4 ghz) ? 19 db return loss (1.2 - 1.4 ghz) ? +19 dbm flat leakage power ? lead - free 10.1 x 6.2 x 3.2 mm 3 package ? rohs* compliant and 260 o c reflow compatible description the madl - 011014 is a lead - free surface mount, high power limiter which integrates the equivalent of 19 pin, schottky, limiter diodes, capacitors, inductors, and resistors in a compact ceramic package. this device provides superior low and high signal performance from 1 - 2 ghz without dc bias. the madl - 011014 is ideally suitable for higher peak and cw power receiver - protector microwave circuits applications where higher performance surface mount limiter assemblies are required. ordering information * restrictions on hazardous substances, european union directive 2011/65/eu. functional schematic pin configuration 3. the exposed paddle centered on the package bottom must be connected to rf, dc, and thermal ground. 1. hermetic seal provides fine leak rate < 5x10 - 8 atmcc/s. 2. moisture seal provides fine leak rate < 1x10 - 5 atmcc/s. top view pin no. pin name description 1 rf in rf input 2 rf out rf output 3 paddle 3 ground part number package madl - 011014 - 001000 hermetic seal 1 madl - 011014 - 002000 moisture seal 2 madl - 011014 - 001smb sample board (hermetic seal limiter) madl - 011014 - 002smb sample board (moisture seal limiter) 2 r f o u t 3 g n d 1 r f i n
320 w peak power limiter 1 - 2 ghz madl - 011014 rev. v1 2 2 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. for further information and support please visit: https://www.macomtech.com/content/customersupport 2 absolute maximum ratings 5,6 parameter absolute maximum peak incident power 3 ms pulse, 10% duty @ +85c +55 dbm cw incident power @ +85c +53 dbm junction temperature 7 175c operating temperature - 65c to +125c storage temperature - 65c to +150c 5. exceeding any one or combination of these limits may cause permanent damage to this device. 6. macom does not recommend sustained operation near these survivability limits. 7. operating at nominal conditions with t j +175c will ensure mttf > 1 x 10 6 hours. electrical specifications: t a = +25c, z 0 = 50 ? (unless otherwise defined) parameter test conditions units min. typ. max. insertion loss - 10 dbm, 1.2 - 1.4 ghz - 10 dbm, 1.0 - 2.0 ghz db 0.35 0.8 0.6 return loss - 10 dbm, 1.2 - 1.4 ghz - 10 dbm, 1.0 - 2.0 ghz db 19 10 p1db input compression power 1.3 ghz dbm +12 c.w. incident power 4 1.3 ghz dbm 55 peak incident power 4 3 ms pulse, 10% duty cycle, 1.3 ghz dbm 55 flat leakage power 3 ms pulse, 10% duty cycle, 1.3 ghz dbm 19 spike leakage power +55 dbm, 3 ms pulse, 10% duty cycle, 1.3 ghz dbm 28 spike leakage energy +55 dbm, 3 ms pulse, 10% duty cycle, 1.3 ghz ergs 0.5 recovery time (3 db of insertion loss) +55 dbm, 3 ms pulse, 10% duty cycle, 1.3 ghz s 3.5 input 3rd order intermodulation products (iip3) - 10 dbm, f1 = 1.500 ghz, f2 = 1.510 ghz dbm 20 4. incident power ratings defined with 1.2:1 source vswr and 1.2:1 maximum load vswr. pulse width vs. peak input power @ +85c ( 10% duty cycle, 1.3 ghz) typical performance curve 0 1 2 3 4 5 6 53 54 55 56 57 58 59 60 peak incident power (dbm)
320 w peak power limiter 1 - 2 ghz madl - 011014 rev. v1 3 3 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. for further information and support please visit: https://www.macomtech.com/content/customersupport 3 typical performance curves insertion loss vs. frequency input return loss vs. frequency pulsed flat leakage power vs. p in (3 ms pulse, 10% duty cycle, 1.3 ghz) cw flat leakage power vs. p in @ 1.3 ghz pulsed spike leakage power vs. p in (3 ms pulse, 10% duty cycle, 1.3 ghz) pulsed 3 db recovery time vs. p in (3 ms pulse, 10% duty cycle, 1.3 ghz) -1.0 -0.8 -0.6 -0.4 -0.2 0.0 1.0 1.2 1.4 1.6 1.8 2.0 +25c -40c +85c frequency (ghz) -25 -20 -15 -10 -5 0 1.0 1.2 1.4 1.6 1.8 2.0 +25c -40c +85c frequency (ghz) 0 5 10 15 20 25 0 10 20 30 40 50 60 +25c -40c +85c incident power (dbm) 0 5 10 15 20 25 0 10 20 30 40 50 60 +25c -40c +85c incident power (dbm) 20 22 24 26 28 30 44 46 48 50 52 54 56 +25c -40c +85c incident power (dbm) 100 1000 10000 44 46 48 50 52 54 56 +25c -40c +85c incident power (dbm)
320 w peak power limiter 1 - 2 ghz madl - 011014 rev. v1 4 4 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. for further information and support please visit: https://www.macomtech.com/content/customersupport 4 lead - free 10.1 x 6.2 x 3.2 mm 3 2 - lead package ? ? reference application note s2083 for lead - free solder reflow recommendations. plating is au over ni over cu . notes: 1. reference jedec mo - 153 - ab for additional dimensional and tolerance information. 2. all dimensions shown as inches/mm. smb layout smb layout part quantity part number rf connector 2 johnson 142 - 0701 - 851 limiter 1 madl - 011014 part number (per ordering information) handling procedures please observe the following precautions to avoid damage: static sensitivity these devices are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these hbm class 1c devices.
320 w peak power limiter 1 - 2 ghz madl - 011014 rev. v1 5 5 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. for further information and support please visit: https://www.macomtech.com/content/customersupport 5 application section transmit - receive block diagram using the l band madl - 011014 limiter a n t c i r c u l a t o r 5 0 h i g h p o w e r l o a d c i r c u l a t o r m a g x - 0 0 1 2 1 4 g a n p a m a a l - 0 1 0 7 0 5 l n a m a d l - 0 1 1 0 1 4 l i m i t e r
|
